/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2016 Jakub Klama . * Copyright (c) 2018 Marcelo Araujo . * Copyright (c) 2026 Hans Rosenfeld * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer * in this position and unchanged. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _PCI_VIRTIO_SCSI_H_ #define _PCI_VIRTIO_SCSI_H_ #include "iov.h" extern int pci_vtscsi_debug; #define WPRINTF(msg, params...) PRINTLN("virtio-scsi: " msg, ##params) #define DPRINTF(msg, params...) if (pci_vtscsi_debug) WPRINTF(msg, ##params) /* Absolute limits given by the VirtIO SCSI spec */ #define VIRTIO_SCSI_MAX_CHANNEL 0 #define VIRTIO_SCSI_MAX_TARGET 255 #define VIRTIO_SCSI_MAX_LUN 16383 #define VIRTIO_SCSI_HDR_SEG 2 #define VIRTIO_SCSI_ADDL_Q 2 /* Features specific to VirtIO SCSI, none of which we currently support */ #define VIRTIO_SCSI_F_INOUT (1 << 0) #define VIRTIO_SCSI_F_HOTPLUG (1 << 1) #define VIRTIO_SCSI_F_CHANGE (1 << 2) /* Default limits which we set. All of these are configurable. */ #define VTSCSI_DEF_RINGSZ 64 #define VTSCSI_MIN_RINGSZ 4 #define VTSCSI_MAX_RINGSZ 4096 #define VTSCSI_DEF_THR_PER_Q 16 #define VTSCSI_MIN_THR_PER_Q 1 #define VTSCSI_MAX_THR_PER_Q 256 #define VTSCSI_DEF_MAXSEG 64 #define VTSCSI_MIN_MAXSEG (VIRTIO_SCSI_HDR_SEG + 1) #define VTSCSI_MAX_MAXSEG \ (4096 - VIRTIO_SCSI_HDR_SEG - SPLIT_IOV_ADDL_IOV) #define VTSCSI_DEF_REQUESTQ 1 #define VTSCSI_MIN_REQUESTQ 1 #define VTSCSI_MAX_REQUESTQ (32 - VIRTIO_SCSI_ADDL_Q) /* * Device-specific config space registers * * The guest driver may try to modify cdb_size and sense_size by writing the * respective config space registers. Since we currently ignore all writes to * config space, these macros are essentially constant. */ #define VTSCSI_IN_HEADER_LEN(_sc) \ (sizeof(struct pci_vtscsi_req_cmd_rd) + _sc->vss_config.cdb_size) #define VTSCSI_OUT_HEADER_LEN(_sc) \ (sizeof(struct pci_vtscsi_req_cmd_wr) + _sc->vss_config.sense_size) struct pci_vtscsi_config { uint32_t num_queues; uint32_t seg_max; uint32_t max_sectors; uint32_t cmd_per_lun; uint32_t event_info_size; uint32_t sense_size; uint32_t cdb_size; uint16_t max_channel; uint16_t max_target; uint32_t max_lun; } __attribute__((packed)); /* * I/O request state * * Each pci_vtscsi_queue has configurable number of pci_vtscsi_request * structures pre-allocated on vsq_free_requests. For each I/O request * coming in on the I/O virtqueue, the request queue handler takes * pci_vtscsi_request off vsq_free_requests, fills in the data from the * I/O virtqueue, puts it on vsq_requests, and signals vsq_cv. * * Each pci_vtscsi_queue will have a configurable number of worker threads, * which wait on vsq_cv. When signalled, they repeatedly take a single * pci_vtscsi_request off vsq_requests and hand it to the backend, which * processes it synchronously. After completion, the pci_vtscsi_request * is re-initialized and put back onto vsq_free_requests. * * The worker threads exit when vsq_cv is signalled after vsw_exiting was set. * * The I/O vectors for each request are kept in the preallocated iovec array * vsr_iov, and pointers to the respective header/data in/out portions are set * up to point into the array when the request is queued for processing. * * The number of iovecs preallocated for vsr_iov is derived from the configured * 'seg_max' parameter defined by the virtio spec: * - 'seg_max' parameter specifies the maximum number of I/O data vectors * we support in any request * - we need 2 additional iovecs for the I/O headers (VIRTIO_SCSI_HDR_SEG) * - we need another 2 additional iovecs for split_iov() (SPLIT_IOV_ADDL_IOV) * * The only time we explicitly need the full size of vsr_iov after preallocation * is during re-initialization after completing a request, and implicitly in the * calls to split_iov() the set up the pointers. In all other cases, we use only * 'seg_max' + VIRTIO_SCSI_HDR_SEG, and we advertise only 'seg_max' to the guest * in accordance to the virtio spec. */ STAILQ_HEAD(pci_vtscsi_req_queue, pci_vtscsi_request); struct pci_vtscsi_queue { struct pci_vtscsi_softc *vsq_sc; struct vqueue_info *vsq_vq; pthread_mutex_t vsq_rmtx; pthread_mutex_t vsq_fmtx; pthread_mutex_t vsq_qmtx; pthread_cond_t vsq_cv; struct pci_vtscsi_req_queue vsq_requests; struct pci_vtscsi_req_queue vsq_free_requests; LIST_HEAD(, pci_vtscsi_worker) vsq_workers; }; struct pci_vtscsi_worker { struct pci_vtscsi_queue *vsw_queue; pthread_t vsw_thread; bool vsw_exiting; LIST_ENTRY(pci_vtscsi_worker) vsw_link; }; struct pci_vtscsi_request { struct pci_vtscsi_queue *vsr_queue; struct iovec *vsr_iov; struct iovec *vsr_iov_in; struct iovec *vsr_iov_out; struct iovec *vsr_data_iov_in; struct iovec *vsr_data_iov_out; struct pci_vtscsi_req_cmd_rd *vsr_cmd_rd; struct pci_vtscsi_req_cmd_wr *vsr_cmd_wr; void *vsr_backend; size_t vsr_niov_in; size_t vsr_niov_out; size_t vsr_data_niov_in; size_t vsr_data_niov_out; uint32_t vsr_idx; STAILQ_ENTRY(pci_vtscsi_request) vsr_link; }; /* * Per-target state. */ struct pci_vtscsi_target { uint8_t vst_target; int vst_fd; int vst_max_sectors; }; /* * Per-device softc */ struct pci_vtscsi_softc { struct virtio_softc vss_vs; struct virtio_consts vss_vi_consts; struct vqueue_info *vss_vq; struct pci_vtscsi_queue *vss_queues; pthread_mutex_t vss_mtx; uint32_t vss_features; size_t vss_num_target; uint32_t vss_ctl_ringsz; uint32_t vss_evt_ringsz; uint32_t vss_req_ringsz; uint32_t vss_thr_per_q; struct pci_vtscsi_config vss_default_config; struct pci_vtscsi_config vss_config; struct pci_vtscsi_target *vss_targets; struct pci_vtscsi_backend *vss_backend; }; /* * VirtIO-SCSI Task Management Function control requests */ #define VIRTIO_SCSI_T_TMF 0 #define VIRTIO_SCSI_T_TMF_ABORT_TASK 0 #define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1 #define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2 #define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3 #define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4 #define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5 #define VIRTIO_SCSI_T_TMF_QUERY_TASK 6 #define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7 #define VIRTIO_SCSI_T_TMF_MAX_FUNC VIRTIO_SCSI_T_TMF_QUERY_TASK_SET /* command-specific response values */ #define VIRTIO_SCSI_S_FUNCTION_COMPLETE 0 #define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10 #define VIRTIO_SCSI_S_FUNCTION_REJECTED 11 struct pci_vtscsi_ctrl_tmf { const uint32_t type; const uint32_t subtype; const uint8_t lun[8]; const uint64_t id; uint8_t response; } __attribute__((packed)); /* * VirtIO-SCSI Asynchronous Notification control requests */ #define VIRTIO_SCSI_T_AN_QUERY 1 #define VIRTIO_SCSI_EVT_ASYNC_OPERATIONAL_CHANGE 2 #define VIRTIO_SCSI_EVT_ASYNC_POWER_MGMT 4 #define VIRTIO_SCSI_EVT_ASYNC_EXTERNAL_REQUEST 8 #define VIRTIO_SCSI_EVT_ASYNC_MEDIA_CHANGE 16 #define VIRTIO_SCSI_EVT_ASYNC_MULTI_HOST 32 #define VIRTIO_SCSI_EVT_ASYNC_DEVICE_BUSY 64 struct pci_vtscsi_ctrl_an { const uint32_t type; const uint8_t lun[8]; const uint32_t event_requested; uint32_t event_actual; uint8_t response; } __attribute__((packed)); /* command-specific response values */ #define VIRTIO_SCSI_S_OK 0 #define VIRTIO_SCSI_S_OVERRUN 1 #define VIRTIO_SCSI_S_ABORTED 2 #define VIRTIO_SCSI_S_BAD_TARGET 3 #define VIRTIO_SCSI_S_RESET 4 #define VIRTIO_SCSI_S_BUSY 5 #define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6 #define VIRTIO_SCSI_S_TARGET_FAILURE 7 #define VIRTIO_SCSI_S_NEXUS_FAILURE 8 #define VIRTIO_SCSI_S_FAILURE 9 #define VIRTIO_SCSI_S_INCORRECT_LUN 12 struct pci_vtscsi_event { uint32_t event; uint8_t lun[8]; uint32_t reason; } __attribute__((packed)); /* * VirtIO-SCSI I/O requests */ struct pci_vtscsi_req_cmd_rd { const uint8_t lun[8]; const uint64_t id; const uint8_t task_attr; const uint8_t prio; const uint8_t crn; const uint8_t cdb[]; } __attribute__((packed)); /* task_attr */ #define VIRTIO_SCSI_S_SIMPLE 0 #define VIRTIO_SCSI_S_ORDERED 1 #define VIRTIO_SCSI_S_HEAD 2 #define VIRTIO_SCSI_S_ACA 3 struct pci_vtscsi_req_cmd_wr { uint32_t sense_len; uint32_t residual; uint16_t status_qualifier; uint8_t status; uint8_t response; uint8_t sense[]; } __attribute__((packed)); /* * Backend interface */ struct pci_vtscsi_backend { const char *vsb_name; int (*vsb_init)(struct pci_vtscsi_softc *, struct pci_vtscsi_backend *, nvlist_t *); int (*vsb_open)(struct pci_vtscsi_softc *, const char *, long); void (*vsb_reset)(struct pci_vtscsi_softc *); void* (*vsb_req_alloc)(struct pci_vtscsi_softc *); void (*vsb_req_clear)(void *); void (*vsb_req_free)(void *); void (*vsb_tmf_hdl)(struct pci_vtscsi_softc *, int, struct pci_vtscsi_ctrl_tmf *); void (*vsb_an_hdl)(struct pci_vtscsi_softc *, int, struct pci_vtscsi_ctrl_an *); int (*vsb_req_hdl)(struct pci_vtscsi_softc *, int, struct pci_vtscsi_request *); }; #define PCI_VTSCSI_BACKEND_SET(x) DATA_SET(pci_vtscsi_backend_set, x) /* * LUN address parsing * * The LUN address consists of 8 bytes. While the spec describes this as 0x01, * followed by the target byte, followed by a "single-level LUN structure", * this is actually the same as a hierarchical LUN address as defined by SAM-5, * consisting of four levels of addressing, where in each level the two MSB of * byte 0 select the address mode used in the remaining bits and bytes. * * * Only the first two levels are acutally used by virtio-scsi: * * Level 1: 0x01, 0xTT: Peripheral Device Addressing: Bus 1, Target 0-255 * Level 2: 0xLL, 0xLL: Peripheral Device Addressing: Bus MBZ, LUN 0-255 * or: Flat Space Addressing: LUN (0-16383) * Level 3 and 4: not used, MBZ * * * Alternatively, the first level may contain an extended LUN address to select * the REPORT_LUNS well-known logical unit: * * Level 1: 0xC1, 0x01: Extended LUN Adressing, Well-Known LUN 1 (REPORT_LUNS) * Level 2, 3, and 4: not used, MBZ * * The virtio spec says that we SHOULD implement the REPORT_LUNS well-known * logical unit but we currently don't. * * According to the virtio spec, these are the only LUNS address formats to be * used with virtio-scsi. */ /* * Check that the given LUN address conforms to the virtio spec, does not * address an unknown target, and especially does not address the REPORT_LUNS * well-known logical unit. */ static inline bool pci_vtscsi_check_lun(struct pci_vtscsi_softc *sc, const uint8_t *lun) { if (lun[0] == 0xC1) return (false); if (lun[0] != 0x01) return (false); if (lun[1] >= sc->vss_num_target) return (false); if (lun[1] != sc->vss_targets[lun[1]].vst_target) return (false); if (sc->vss_targets[lun[1]].vst_fd < 0) return (false); if (lun[2] != 0x00 && (lun[2] & 0xc0) != 0x40) return (false); if (lun[4] != 0 || lun[5] != 0 || lun[6] != 0 || lun[7] != 0) return (false); return (true); } /* * Get the target id from a LUN address. * * Every code path using this function must have called pci_vtscsi_check_lun() * before to make sure the LUN address is valid. */ static inline uint8_t pci_vtscsi_get_target(struct pci_vtscsi_softc *sc, const uint8_t *lun) { assert(lun[0] == 0x01); assert(lun[1] < sc->vss_num_target); assert(lun[1] == sc->vss_targets[lun[1]].vst_target); assert(sc->vss_targets[lun[1]].vst_fd >= 0); assert(lun[2] == 0x00 || (lun[2] & 0xc0) == 0x40); return (lun[1]); } /* * Get the LUN id from a LUN address. * * Every code path using this function must have called pci_vtscsi_check_lun() * before to make sure the LUN address is valid. */ static inline uint16_t pci_vtscsi_get_lun(struct pci_vtscsi_softc *sc, const uint8_t *lun) { assert(lun[0] == 0x01); assert(lun[1] < sc->vss_num_target); assert(lun[1] == sc->vss_targets[lun[1]].vst_target); assert(sc->vss_targets[lun[1]].vst_fd >= 0); assert(lun[2] == 0x00 || (lun[2] & 0xc0) == 0x40); return (((lun[2] << 8) | lun[3]) & 0x3fff); } #endif /* _PCI_VIRTIO_SCSI_H_ */